+1 (314) 579-9755

Sales@skimoil.com

Tube Oil Skimmer

Fishboy Tube Type Oil Skimmer

How The Oil Skimmer Works
Skimoil’s Fishboy Oil Skimmers use our specially formulated FishTube collector tube that is sized in length for the application and welded into a continuous loop. FishTube collector tube floats on the surface of water and is driven in a continuous loop by the skimmer. Oils, fats, and grease cling to the outside surface of the tube and are drawn into the skimmer. The material drawn into the skimmer is scraped off by abrasive resistant Dureon® scrapers and flows into a sludge pan with drain coupling. The clean tube is then driven back to the surface of the water by the skimmer to remove more material.
Animal fats, cooking oil, cutting oil, diesel fuel, fly ash, gasoline, grease, hydraulic oil, jet-a fuel, kerosene, lubricating oil, paint sludge, quench oil, RAD waste, silicone, solvents, sludge, soybean oil, tramp oil, vegetable oil, waste oil — no problem for a Skimoil Fishboy Oil Skimmer with FishTube collector tube.

Oil Skimmer — Model S01GB “Large Mouth” The largest Tube Type oil skimmer available! Designed for indoor and outdoor applications where the highest removal rates of any Tube Type skimming system are essential — large settling basins, scale pits, cooling ponds and pre-filtration waste water treatment settling basins. Uses our 1″ FishTube for maximum oil, fat and grease removal. Typical Removal Rates: Light oils & grease – 14 GPH

Medium oils & grease – 34 GPH, Heavy oils & grease – 80 GPH. High speed units are available that nearly double the removal rate capacity of the oil skimmer. The Model S01GB Is Supplied Complete With: 1/2 HP 115/230 volt single phase motor or 230/460 volt three phase motor

Safety guard with integral Dureon® scrapers & pressure blocks, Lubed for life gear reducer, bearings and sprockets, Quick connect and release drive and pulley wheels, Single ring replaceable Dureon® drive and pulley wheel wear rings, Modern drive and pulley wheel timing belt drive system with belt tension device, Rear safety guard.

Large Mouth Tube Type Oil Skimmer Spec Sheet >

request a quote / more information

Tube Oil Skimmer

(314) 579-9755

Oil Skimmer – Model S52GB “Minnow” The most compact Tube Type oil skimmer available! Designed for applications where space is limited — parts washers, small oil/water pre-filtration equalization tanks and individual machine and central coolant systems. Uses our 1/4″ FishTube for fast and easy tramp oil, waste oil and other material removal needs. Typical Removal Rates: Light oils & grease – 4 GPH, Medium oils & grease – 9 GPH,

Heavy oils & grease – 20 GPH. The Model S52GB is Supplied Complete With: 1/12 HP 115 volt single phase motor, Safety guard with integral Dureon® scrapers & pressure blocks, Lubed for life gear reducer, bearings and sprockets, Sludge pan with 1″ drain coupling, and 3’ of 1″ drain hose with clamp for connection to drain coupling.

Minnow Tube Type Oil Skimmer Spec Sheet >

Oil Skimmer Removal Rates
Removal rates for any oil skimmer depend on the viscosity of the material being removed and the amount of new material introduced into the application area on a regular basis. The higher the quality and more viscous the material the higher the removal rate.

Skimoil has every Oil Skimmer Technology known to man! Give us a call so we can match your application to the right skimmer!