Oil Water Separator
The Brute Marine Oily Water Separator
Marine Oily Water Separators
USCG/ABS/BV Type Approvals/Certified Meets IMO/MEPC 107(49)
BRUTE Marine Oil Water Separators are tough, well built, easy-to-operate systems. With simple operation, these rugged marine oily water separators are shipped complete as systems with motor, pumps, piping, monitor and controls and are ready to be easily installed and operated —without delay. Simple efficient design and high quality components = Simple operation and reliability Explosion Proof and Oil Rig Separators available.
Meets all IMO MEPC 107(49) Requirements
BRUTE Brochure and Spec Sheet
These marine oily water separator units are designed to operate automatically and monitor and adjust to your conditions. Self priming systems mean hassle free simple operation. These BRUTE separators will work at a 30° pitch — even while ship is in motion! No need for these bilge oily water separator units to be installed on flat, level, or even surface.
Workboats · Ships · Shoreside · Offshore Oil Platforms · Port Facilities · Dredges
In stock for FAST delivery!
Call (314)579-9755
Easy to use and maintain – Compact & low profile EZ install – Ready to operate
2.2, 5, 11, 25 & 45 gpm models available.
Ready to meet the USCG?
Why BRUTE marine oil water separators? They are asy to use and maintain — compact & low profile — easy retrofit- No consumables- Simple Bubba-proof Automated controls-Quality built in USA!
With US Coast Guard and IMO MEPC 107(49) certification our standard BRUTE separators are installed all over the world in many applications. They are known for their Heavy Duty construction, Simple and Efficient Operation and Affordability. Each unit comes built to operate for long periods of time in a harsh Industrial/Marine Environment with very little maintenance, attention or trouble. This unit can be provided to match any electrical power needs. Normally provided standard with a 3 phase power requirement.
Models
Dimensions
Dry Weight
Dry Weight
Wet Weight
Wet Weight
w/o monitor
(inches)
Lbs
Kgs
Lbs
Kgs
BBOWS 2.2
27x31x50
300
136
396
180
BBOWS 5
28x38x56
500
127
740
336
BBOWS 11
36x43x69
900
408
1428
648
BBOWS 25
41x47x72
1200
544
2600
1179
BBOWS 45
54x62x75
1750
794
4270
1937
Dimensions are width x length x height in inches. Weight is in lbs(Kg).
Notes:
Various options will change the numbers. As an example, adding an MOV will add 2″ to the height.
Other options that will change dimensions are High Lift, Hazardous Area, and Skid.
CAUTION: DIMENSIONS CHANGE FREQUENTLY.
CONFIRM DIMENSIONS WITH SKIMOIL BEFORE ORDERING!
NOTE: Add “107” to above oil water separator model numbers for unit to meet IMO 107(49).
BRUTE Bilge Oily Water Separators (BBOWS) Removal Systems are industrial marine grade oil water separators that have a variety of applications. Fully US Coast Guard certified with vessels and piping and the standard oil water separator unit being constructed from carbon steel to ASME specifications and are coated with an industrial strength epoxy coating.
IMO MEPC 107(49) certified OWS require a filter, the design remains simple and media replacement is made easy. BRUTE bilge separators use an organoclay filter media which will hold up to an amazing 50% of its weight in oils! Rugged construction of the oil water separator and its lack of moving parts make maintenance minimal. Brute Marine Oily Watet Separators are quality built in the USA and shipped as complete systems— Self monitoring with OCM· Simple maintenance free design EZ install – Ready to operate · Heavy duty epoxy/Poly-u coating · High quality components · Conductivity sensor – No filters · Stainless steel centrifugal pump · Bronze & red brass piping & valves
2.2 gpm, 5 gpm, 10 gpm, 25 gpm, & 45 gpm. Available with or without oil content monitor. Custom sizes available – to hundreds of GPM.
2.2 In stock for FAST delivery! Call (314) 579-9755
2.2 In stock for FAST delivery! Call (314) 579-9755
Not required to have a full blown Oily Water Separator? Check out the BilgeFilter. An easy $$ cheap solution
General Description
BRUTE Bilge Oil Water Separators (BBOWS) Removal Systems are industrial marine grade oil water separators that have a variety of applications. Fully US Coast Guard certified with vessels and piping in the standard oil water separator unit being constructed from carbon steel to ASME specifications and are coated with an industrial strength epoxy coating.
NEW BRUTE IMO MEPC 107(49) Certified 107 Series Bilge Oil Water Separator
In January of 2005, many countries began requiring new ships and ships replacing oil water separators (over 400 tons) to meet the IMO MEPC 107(49) regulations. This regulation requires removal of not only free oil as the previous regulation did, but also what is called “fluid C”. Also oil content monitors are required to track results of separation. This new requirement has significantly raised the price of a bilge separator and limited the separators to choose from. The BRUTE Series 107 brings you the best, economical system available today to meet this new requirement. Our filter exchange program makes it easy.
Platform BRUTE–Oil Water Separators for Offshore Oil Platforms
SkimOIL Platform BRUTE Oil/Water Separation System is specifically designed for installation on offshore oil platforms. These systems use a proven coalesing technology for simple, effective, efficient, low maintenance separation of oil and water. Systems are engineered specifically to meet your specifications. Typical systems include the following:
- Automatic Operation with auto backflush and recycle
- NEMA 7 Class I Division II Explosion Proof Controls & Electrical
- Explosion Proof Oil in Water Monitoring to 15 PPM (5 PPM with Polishing)
- IMO Approval and US Coast Guard Certification
- Skid Mounted Epoxy Coated Steel Vessels
- Marine Bronze or SS Piping and Valves
- Post Separation Multimedia Filtering for Particle/Contaminant Removal
- Turbidity and pH Monitoring and UV Disinfection
- Flow meters/Transmitters for Water Inlet and Discharge and Oil Discharge
BRUTE Series “HF” Marine/Industrial High Flow Oil Water Separator
This new option can save a tremendous amount of money on a separator in the situation when large amounts of water need to be processed that are mostly clean, but must be monitored and processed if oil content is above the limit. As an example 400 gpm can be processed from a pond or tank and moniored continuously. The separator is bypassed until it is needed and then processes the oily water at 45 gpm when needed.
BRUTE Series “I” Industrial Oil Water Separator without Oil Content Monitor
For all kinds of industrial applications these series “I” model separator systems are built to be for totally automatic operation. No consummables or maintenance. Just set them and forget them.
General Description
BRUTE Bilge Oil Water Separators (BBOWS) Removal Systems are industrial marine grade oil water separators that have a variety of applications. Fully US Coast Guard certified with vessels and piping in the standard oil water separator unit being constructed from carbon steel to ASME specifications and are coated with an industrial strength epoxy coating.
U.S. Coast Guard Certified
Our line of BRUTE marine Oily Water Separator is certified by the U.S. Coast Guard (USCG). These certifications include both the older IMO MEPC 60(33) certification and the new IMO MEPC 107(49) certification. Units were tested by certification labs to operate within the limits and regulations of the IMO standards. Coast Guard certification is therefore available for your unit as an option if you need it.
IMO - International Maritime Organization
The IMO has established the standards that have to be met for certification. Our BRUTE units have been tested to these standards and the testing verified by the USCG for regulations 107(49).
ABS Certification
ABS has given it’s type approval to the BRUTE Separator.
Canadian Coast Guard Type Approval
BRUTE MARINE OILY WATER SEPARATOR ADVANTAGES & BENEFITS
Complete - Ready to Operate
BRUTE oil water separator units are shipped complete with motor, pumps, piping and controls and are ready to be easily installed and operated without delay.
Automatic Operation
Operation of this unit is a simple process. With just a little training the system can be started & runs automatically from that point on.
Simple Reliable Design & Operation
These oil water separator systems are designed to be simple. No complicated piping or schemes. Reliability comes as a result of the solid construction, the lack of moving parts and the simplicity.
Small Footprint
The BRUTE oil water separator is designed to fit on ships, platforms and other tight spaces. This unit has a small footprint making it adaptable to most situations
Low Consumables- Low Maintenance
The standard oil water separator uses no consumables of any kind including filters. This means lower operating costs and headaches. Although the new IMO MEPC 107(49) certified unit requires a filter, the design remains simple and media replacement is made easy. The rugged construction of the oil water separator and it’s lack of moving parts make maintenance minimal.
Self Monitoring / Self Priming
These marine oil water separator units are designed from the bottom up to operate automatically and monitor and adjust to your conditions. Self priming systems mean hassle free operation. There is no need for these oil water separator units to be installed on a flat, level, or even immobile surface. This makes them ideal for trucks, ships and other mobile applications.
Withstands Heavy Vibration / Motion
There is no need for these oil water separator units to be installed on a flat, level, or even immobile surface. This makes them ideal for trucks, ships and other mobile applications. Designed for ships, heavy vibrations, violent motion and up to 30 degree plum tilt cause no problems with performance or reliability on these oil water separators.
Low Operating Cost
Because of the solid construction of these marine oil water separators, low maintenance requirement, and low consumables, the operating costs are incredibly low.
High Quality Industrial Components
Each component used in the marine oil water separators has been individually selected for it’s industrial strength, strong vendor support, reliability and low maintenance requirements.
Units in Stock for Quick Shipment
We stock various sizes of basic marine oil water separators so as to be able to respond quickly to your needs. We can often take a stocked separator and add the options you need quickly to get you up and separating. Give us a call to see what we can do for you.
Custom Need Consultation
Our engineering department is available for consultation regarding your custom marine oil water separator requirements. Each Specific application usually has some specific needs. Let us help you determine exactly what will work for you.
FREQUENTLY ASKED QUESTIONS
What is the BRUTE oil water separator?
Designed to fit a small space on ships, the BRUTE is a simple, very effective solution for bilge applications. In addition, we have found the oil separating capability of the unit suited to many other applications, both marine and oil & gas and industrial.
In what applications can the BRUTE separator be used?
While the primary use for the BRUTE system is still bilge oily water separation, the BRUTE unit can be used in any application where oil and water need separating. The simplicity of the system and its flexibility have made it popular in applications from compressor oil to car/truck wash to large platforms and FPSOs and everything in between.
Do I have to provide exact specs or can you help me with specifications that will meet my needs?
You may provide us with exact specifications for your proposed separator and we will be happy to provide a bid. Or if you call our expert staff we can help you design the specifications that will work for your application.
What if I need a different size than the 5 sizes you offer?
The standard separator ranges from 2-45 gpm. These are the units we stock and sell the most. We can however, easily design a different size and propose a solution to much larger applications.
How does this separator handle emulsified oil?
Emulsified oil can be separated in the BRUTE system by applying various pre and post separation treatments and filtering. The standard IMO MEPC 107(49) certified unit comes standard with a post filter that will remove emulsions. Many other applications also include the need for filters.
Just how much motion can these units handle and still operate effectively?
The BRUTE oily water separators were designed to handle motion and vibration on ships and will continue to operate even at a 30 degree tilt. These are rugged, well built units that can stand up to all kinds of harsh environments.